SAMES KREMLIN | 20C50 GT Airmix® Paint Pump

Description

Ideal for Airmix® applications
High efficiency pump for maximum energy savings
Optimized construction for simple & quick maintenance

► Technical manual

Performance:

Economical with low air consumption
Quiet air motor to preserve work environment

Productivity:

Construction without dead zones for quick flushing & product changes
The mobile seal located on the piston ensures the mechanical cleaning of the fluid section internal wall during pump runs
Lower mobile single lip packing (GT) reducing friction for improved efficiency

Sustainability:

Fewer parts & simple design for extended lifetime
Upper single lip packing (GT) reducing friction for improved efficiency
Triple chrome layer piston for exceptional durability

A large choice of accessories allows you to create various configurations to meet all customer requirements.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	20/1
Maximum Fluid Pressure	120 (1740)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	10.8 (6.4)	m³/h (cfm)
Weight	17 (37.5)	kg (lbs)
Maximum Temperature	60 (140)	°C (°F)
Cylinder	50 (1.69)	cc (oz)
Sound Level	78	dBa
Recommended Air Pressure	2 - 5 (29 - 72.5)	bar (psi)
Fluid Output at 30 cycles/mn	1.5 (0.4)	l/min (gal/mn)
Fluid Output at 20 cycles/mn	1.0 (0.26)	l/mn (gal/mn)
Fluid Volume Per Cycle	50	cc
Free Flow Rate	3.0 (0.78)	l/mn (gal/mn)
Fluid Output at 15 Cycles	0.75 (0.2)	l/mn
Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)	10.8	m³/h (cfm)
Displacement Per Cycle	50 (3.05)	cc (cubic inch)
Motor Type	500-4
Air Inlet	F3/8" BSP / F3/8" BSP
Fluid Outlet	F 1/2" NPS / M1/2" JIC
Fluid Inlet	F 1/2" BSP / M26x125
Number of cycles per liter of products	20
Sealing packing upper and lower GT polyethylene	♦
Height	82 (32.3)	cm (in)
Width	35 (13.8)	cm (in)
Depth	21 cm (8.3)	cm (in)
Wetted parts hard chrome SST, standard SST, carbide	♦

Technologies

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump with a lubricant-filled cup on the top of the fluid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

Leaflet 10C50 -20C50 -40C50 Paint Pump (English version) SAMES KREMLIN

Format : application/pdf
Size : 499Ko

Select the document

catalog-airmix-range-sames-kremlin

Format : application/pdf
Size : 3Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Penetrant (NDT Testing)

Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied & low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials & ferrous materials, although for ferrous components magnetic particle inspection is often used instead for its sub-surface detection capability.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Markets