SAMES KREMLIN | REGSMART Regulator for Semi-Viscous Materials

Description

Easy to maintain
Low shear fluid passages
Wide operating pressure range

► Technical manual

Performance

Large operating pressure range at high flow rate for high performance
Compact design so pump fits in any work area
Ball and seat configurations available in (3) different diameters to suit flowrate and viscosity needs
Repeatability for high performance

Productivity

Flow controlled by pressure air regulator for high precision control
Optimized design for easy cleaning, removeable cartridge, and quick maintenance (less than 1 minute)

Sustainability

Optimized fluid passage design for low shear and less dead zone areas

Technical data table

Designation	Value	Unit: metric (US)
Weight	4 (9)	kg (lbs)
Fluid Passages	Ø6 / Ø8 / Ø12	mm
Inlet Pressure Maximum	400 (5802)	bar (psi)
Outlet Pressure - Regulated Range	25 - 275 (363 - 3989)	bar
Air Pressure Maximum	6 (87)	bar
Max Working Temperature	60 (140)	°C
Material Inlet & Outlet	3/4"G
Wetted Parts - Stainless Steel	PTFE, FFKM
Average Output	0.9 / 3 / 9 (0.24 / 0.79 / 2.38	l/mn (gal/mn)

Technologies

Driven Regulator

.

Cartridge

.

Regulation Principle

.

Documents

Select all documents

Leaflet REGSMART Regulator for Semi-Viscous Materials (English version) SAMES KREMLIN

Format : application/pdf
Size : 502Ko

Select the document

Catalog REXSON dispense start range (English version) SAMES KREMLIN

Format : application/pdf
Size : 3Mo

Select the document

Materials

Grease Graphite

Solid lubricating additives, including graphite, are added to some grease to improve its lubricating properties.

Grease Silicone

Silicone grease is commonly used for lubricating & preserving rubber parts, such as O-rings. Additionally silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon-based grease. It functions well as a corrosion-inhibitor & lubricant for purposes that require a thicker lubricant. Thermal grease often consists of a silicone grease base along with added thermally conductive fillers. It is used for heat transfer abilities rather than friction reduction.

Silicone Two-Component Sealant

Silicone sealants can be used in two or three components for increasing mechanical capabilities.

Silicone Sealant

Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.

Polyurethane Sealant

Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.

Polyurethane Sealant with Accelerator

Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.

Polyurethane Two-Component Sealant

Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.

MS Polymer Sealant

Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.

Hybrid Sealant

Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.

Adhesive Polyurethane

Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.

Adhesive 1K Accelerator

Additional accelerator used for polyurethane or silicone adhesives speed up the chemical reaction between the adhesive & the material they are bonding. Used often in the field where temperatures are lower to accelerate the bonding times.

Adhesive Polyurethane Multi-Component

Two-component polyurethanes (also called 2C PUR) have the advantages of single component polyurethane adhesives, but cure more quickly through larger gaps & are not dependent on moisture/heat for curing.

Adhesive Acrylic

Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.

Adhesive Silicone

In general, users can count on silicone adhesives to produce bonds that can withstand high temperatures (in some cases up to 600°F), remain flexible even after curing & resist chemicals including water.

Adhesive Silicone Multi-Component

Two-component silicone has the advantages of single component silicone adhesives, but cure more quickly through larger gaps & are not dependent on heat for curing.

Adhesive Epoxy

Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.

Adhesive Epoxy Multi-Component

Two-component epoxies feature unique versatility in application & performance. These systems consist of a resin & a hardener that can be formulated to offer a wide range of mechanical, thermal, optical & electrical properties.

Markets